Oscar Ono Qubes Wood Flooring
All Prices are Ex Works. Contact us for Shipping Quotes. Volume Pricing Available.
BASIC ENDGRAIN FOUNDATION FOR GREAT PROJECTS
Qubes has been engineered because sometimes a project is on a budget-leash while the floor needs to offer all technical and aestethical advantages of endgrain.
Qubes is made of European oak endgrain that offers hardness, durability and improved acoustics.
We invite you to discover Qubes, an engineered endgrain flooring at democratic prices.
Qubes natural finish provides a nice textured oak that plays with light. Invisible UV oils seal the surface and offer a very high resistance. A highly crafted surface in an uncompromising quality.
Adapted for residential, hospitality, and retail projects (usage class 34 and fire rating Cfl-S1)
Customize Your Product
BEFORE THE INSTALLATION
All jobsite conditions should comply with Oscar Ono specifications, including but not limited to humidity levels and sub-floor conditions. Be sure that the Oscar Ono engineered products meet your expectations. When possible, we suggest loose-laying several square feet of the flooring in the general location where they will be
installed. If the visual appearance, color, sheen, or manufacturing quality does not meet your expectations, do not proceed with the installation. The placement of any Oscar Ono flooring products into mastic for adhering purposes constitutes your acceptance of the materials.
To achieve a regular distribution of the grade in the installed floor, we recommend installing from different cartons or pallets at the same time.
CHECK RELATIVE HUMIDITY
With a reliable hygrometer, sling psychrometer, or electronic monitoring device, check the humidity in the space where the flooring is to be installed. Normal humidity should read between 35-55% assuming a 18°-25° C/ 65°-75°F temperature. If humidity is not normal, postpone installation until conditions are normal.
CONDITIONING & UNPACKING
Do not unpack unless heating, air conditioning, and humidity controls are in full operation and room conditions are normal. Store and acclimate unopened cartons inside the spaces where they are to be installed. The length of acclimation may be adjusted at the discretion of the installing contractor and is based upon the atmospheric conditions at the time of the year. In any event, the temperature of the room and the building must be uniformly maintained at not less than 18° C / 65°F from delivery, through acclimation, as well as during and after installation.
The purpose of acclimating wood flooring is to allow the moisture content of the planks to adjust to normal conditions. The temperature and humidity that will be typical once the facility is opened, and the permanent Heating, Ventilating and Air Conditioning (HVAC) system is functioning and balanced. Before Oscar Ono floor panels are delivered, the job site must be checked to determine if it is ready. The structure should be fully enclosed, with doors and windows in place, and interior climate controls operational for at least 48 hours to stabilize the moisture conditions. Wood flooring should not be delivered until all wet-work is completed. If conditions are not stable, acclimation may be harmful to the installation. If you know the Equilibrium Moisture Content (EMC) of wood in your region, the wood might already be at the proper moisture content, and acclimation for any length of time may not be necessary. The installer should have a clear understanding of the EMC in order to determine the length of acclimation. This requires knowing and recording the moisture content of the wood at the time of delivery, and what the expected moisture content will be at equilibrium. The flooring is manufactured at 7-9% EMC. At equilibrium, the moisture content of the wood neither gains nor loses water because it has reached equilibrium with the vapor pressure of the surrounding atmosphere. Changes in relative humidity and temperature of surrounding air cause both seasonal, long term, and daily short-term changes in the moisture content. Long-term changes are gradual as moisture slowly penetrates the wood, while short-term fluctuations influence only the wood surface. Protective coatings slow the changes in moisture content, but ultimately the wood will attain equilibrium.
Humidity maintained above 60-70% at normal residential temperatures can adversely affect wood components. Humidity sustained at or above this level can result in an EMC of 12% or more with associated expansion. Humidity maintained at or below 25-30% can adversely affect wood components and result in an EMC below 6%. This condition can cause greater than normal shrinkage with associated cracks. (Source: Wood Handbook U.S.
Department of Agriculture, Forest Products Laboratory) Ideal conditions for all wood flooring would be to acclimate and install at the average level of humidity in your particular facility, which should be in 35-55% range. (Source: National Wood Flooring Association Wood Flooring Installation Guidelines and Methods, revised 05/2012, page 10, article B-1 Wood’s Comfort Zone). As a general rule, with geographic exceptions, wood flooring will perform best when the interior environment is controlled to stay within a relative humidity range of 30-50%, and a temperature range of 16° to 27° C /60° to 80° F. In some climates, the ideal humidity range might be higher or lower, 25-45% or 45-65%, for example. We would be pleased to discuss with your length of acclimation for your particular installation.
NOTE: We always recommend at least 2 days of acclimation prior to installation. Never install plank flooring on the same day as delivery.
The sub-flooring should be depressed 20/22mm or ¾” corresponding to the depth of the Oscar Ono floor Panels. If cork or rubber underlayment is specified for added resiliency, allow for extra depth. A vapor barrier or reliable water-resistant concrete sealer (i.e. Rubio Easybond or Bostik’s MVP or an equivalent) should be used when moisture from below is of concern. New concrete slabs must be cured (at least 50 days) and dry. Below grade installations are not recommended. Be sure the concrete sub-floor is smooth and level. Tolerance should not exceed 5mm or 3/16” on a 30 cm / 10 ft. straight edge in any direction. Check floor level with straight metal strip on edge, double check edges and corners. Eliminate any washboard irregularity. All rough spots or gravel protruding must be ground smooth and low areas filled with leveling compound. If tolerance is not as specified, the flooring contractor must insist the masonry contractor make necessary corrections. Concrete should be tested for moisture content and be no greater than 1.4KG / 3 lbs. per 92 SQM / 1,000 sq. ft. per 24 hours (ASTM F-1869), or 75% RH (ASTM 2170). We recommend a bond test before spreading mastic and installing Oscar Ono Panels. A test should be made with your chosen adhesive and several of our Panels before beginning the installation. Check with us about your particular condition.
There should not be any cupped area, or projecting nails. If planks are to be installed on an existing synthetic floor or raised computer floor system, 12mm or ½” minimum plywood or hardboard underlayment should be added, glued and screwed to the synthetic surface.
As a general rule, perimeter expansion space should be 20mm or ¾” wide. Cork strips 12mm or ½” to 38mm or 1-½” may be used against all walls and columns, unless concealed by shoe moldings or other base. Place temporary wooden strips along the walls and columns equal to the width of the void to be created. After installing panels flush to the strips, at the end of the day, remove the temporary strips, leaving a uniform void for expansion. In aisleways and other narrow areas where panels meet carpet or other flooring, the expansion void can be omitted. Schluter strips should be used at panel edges against carpet or other adjacent
In doorways and large areas over 10 meter or 33 feet in length and/or width, a cork expansion joint or other suitable material should be installed. Apply a molding or cover strip over the expansion joint. We suggest cork expansion joint 16mm or ⅝” in height x any width up to 25mm or 1”. Ensure that the boards are always laid lengthwise in narrow hallways. For sound insulation and to smooth out slight irregularities of the sub-floor, use roll or sheet goods of 3mm or ⅛” cork space. We don t recommend “floating installation”.
Oscar Ono products may be nailed directly over wood or plywood sub-floors, which are solid, level, and well ventilated below. Top nail and blind nail the 1st row. Typical 25 mm or 1 to 30mm or 1-1/2” staples every 75- 100mm or 3”-4”, or 25mm to 30mm / 1 to 1-1/4” hardwood flooring cleats every 100-150mm or 4”-6”. Glue in place for a more permanent installation. Rubio easy bond 1K advised. Start the installation in a corner of the room and fix the first flooring panel in place with distance spacers from the wall 10mm or ⅜” to 15 mm or ½”. Leave a gap of 10mm – 15mm or ⅜” to ½” between panels ends and walls. Join the subsequent panels together row by row. On completion, remove the distance spacers at all walls. Attach a base molding to the wall and not to the flooring, covering over the space created during installation. If no base is to be used, suggest filling void with pre-molded cork.
Since Engineered products have only a thin surface of 8mm or 5/16” end grain wood, there can be no voids left below the end grain surface. Therefore, when installing the plank up against another flooring surface, or up against Schluter, you must cut off either the Tongueue or the groove, so that the end grain and ply bottom on which it sits fits tight against the adjacent flooring or Schluter. If a void is left after installation, the entire edge of the end grain surface will break away, requiring difficult repairs. If there are any questions about this subject, please contact us before starting your installation.
NOTE: After installation, the floor should be covered and protected to avoid construction damage. Do not use scotch tape, duct tape, etc. directly on the flooring.
We do not recommend optional filling of the gaps between the patterns or panels. However, Oscar Ono can assist with instruction video how to proceed. PLEASE NOTE THAT OSCAR ONO WAIVES ALL RESPONSIBILITIES AND LIABILITIES.
Professional Video Tutorial: https://www.youtube.com/watch?v=9OxCgzof3S0
RULES WITH UNDER-FLOOR HEATING
(WATER AND ELECTRICAL)
Installing an Oscar Ono floor in combination with under-floor heating can be easily achieved and will ensure your home is as as possible. When installing a wooden floor in combination with under floor heating you must, however, follow a number of specific rules. The Oscar Ono guarantee applies to wooden floors that are installed in combination with an under-floor heating system as long as the instructions below are observed.
Wood is a natural material and may warp (shrink or expand) when the temperature or humidity level changes. lt is, therefore, very important that the under-floor heating system is correctly operated. This will ensure that a wooden floor is not negatively influenced. Special conditions and rules for installing an Oscar Ono floor in combination with under-floor heating:
• With under-floor heating using hot water: the thickness of the concrete floor screed 1anhydrite floor that is poured/ applied over the heating pipes must be at least 30mm .
• The prescribed heating protocol must be followed regardless of the season to achieve the allowed moisture percentage of the screed. The screed must be at least 28 days old before the under floor heating is turned on.
• The moisture percentage of the concrete screed may not be higher than 1.5% before the wooden floor is installed. This moisture percentage may not be higher thon 0.3% with regard to an anhydrite floor.
• The wooden floorboards must be allowed to acclimatize for at least 48 hours in their unopened packaging in the room where they are to be installed.
• Switch off the central heating system two days before the wooden floor is to be installed. The room temperature, however, may not be lower than l8°C when the floor is installed.
• We recommend to fully glue the floor to the subfloor and use a suitable water-free adhesive. For more information consult your adhesive supplier. Nails cannot be used when installing a floor on under-floor heating.
• When the wooden floor has been installed, the under-floor heating can be put into operation in accordance with the prescribed heating protocol. The heating protocol during the first time the system is used: The first day the under-floor system temperature should be set to 20°C. The temperature must subsequently be increased by 5°C every 24 hours. The system temperature may not be higher than 45°C and the floor temperature may exceed 28°C.
"Plywood: 10mm - 100% Birch waterproof quality, D4 adhesives",Oak toplayer: 6mm,Adhesive Toplayer: 1 component glue with ISO normation 17178,Connection boards: Loose tongue and groove,Bevel: N/A,Oak Blocks: Round Gap approx 1.5mm
Timber Specie: European Oak,"GRADING SPECS: - Grow defects: 20mm - Knots: Max. 40 mm/ In max. 30% of board. Filled - Sap wood: Little - Water spots: yes - Worm holes: no - Dark color shaded: no - Drying stripes: no - Cracks: < 20mm, Filled - Rouge: no"
- Wood products: 8-12% moisture
- Ideal indoor environment: 40-60% humidity
- Indoor only use only
CLEANING & MAINTENANCE
We recommend daily cleaning of the Oscar Ono floor by hovering the surface and gaps. Excessive dirt can be removed by cleaning with water like you should do on a regular wooden floor. We recommend a humid soft microfiber cloth using a mix of water and neutral soap. Mop the floor to remove trapped dust in the grain. Avoid using excessive amount of water, as this might trap water between the gaps of the pattern. Just some minor spill of water into the gaps is no problem and will evaporate in time. The gaps allow the floor to extend and shrink causing no damage by regular cleaning as mentioned above. Always avoid using cleaning materials containing alcohol, stain removers, acetone, trichlorethylene, ammonia, bleach and detergents that contain bleach. Never use steam cleaners or scrubber dryers on a wooden floor. Maintenance depends on intensity of the traffic on your floor, but we recommend at least an extensive cleaning and visual check once a year. When there are noticeable signs of wear, you will need to occasionally apply a product such as Sayerlack LINEA BLU, product code: HH8012/00 or any substitute as f.e. “Bona Freshen Up”. This is easy to do with an applicator pad or suitable mop and will revive a scratched and dull surface and provide continued protection against wear. Your floor will need approximately 2 hours to dry after this kind of treatment.
SCRATCHES AND DAMAGED PIECES
It may occur that after time some pieces may be scratched or damaged. Pieces can always be replaced by skilled labor.
Professional Video Tutorial: https://youtu.be/1q3pyVegTv8
Excessive wear and tear of the floor can be repaired by sanding the floor and revarnish it. WE DO NOT RECOMMEND URETHANE FINISH ON OPUS PANELS
CERTIFICATION COMPLIANCE: - FSC: On Request - CE: EN 14342 - VOC Emissions: E1/ ISO 16000 - Fire Resistance Rating: Cfl-S1 - Brinell Hardness Rating: 3.7 (Medium-Hard Wood: 2.5 to 3.8) - Thermal Resistance: 0.14 m² K/W (Depending on the installation surface),CERTIFICATE OF CONFORMITY: N° 181111-1EN,Product identification name: COLLECTION FORÊT,Product application: Technical wood flooring elements following EN 13489,Certificate Holder: Oscarono Paris,Manufacturer: Oscarono Paris,Applicable standard: EN 14343:2013,Date of issuance: January 2021
No ratings found yet!